METHODOLOGY FOR ELECTROSTATIC HAZARD RISK ASSESSMENT MULTI PRODUCT FACILITY
Electrostatic discharge (ESD) is a critical ignition source for combustible substances and flammable liquids. Effective safety measures require a thorough understanding and assessment of electrostatic charge. Preventing static charge separation is challenging because its origin is often at the interface of materials. Static electric charge builds up when the rate of charge separation exceeds the rate of charge recombination. While charge separation alone may not pose a fire or explosion hazard, the risk arises during discharge or sudden recombination of these charges, potentially causing ignition. In static electric phenomena, charges are typically separated by resistive barriers such as air gaps or insulation between conductors, or by the insulating properties of the materials being handled or processed. Sparks commonly occur between conductors and insulators. The human body, a proficient electrical conductor, has been involved in many static electric discharge incidents. Sparks from ungrounded charged conductors, including the human body, are primary causes of fires and explosions ignited by static electricity. Conducting an on-site evaluation or survey of the process is crucial to identify any ungrounded conductive objects, including personnel, and materials that could act as electrical insulators, interfering with proper bonding and grounding. This survey should identify locations that might pose a static electricity hazard, even if charge accumulation is not evident at the time of evaluation.
METHODOLOGY FOR LOPA STUDY
The LOPA (Quantitative Technique) is based on establishing a tolerable frequency for each consequence resulting from an impact event. LOPA is a simplified form of risk assessment. LOPA typically uses order of magnitude categories for initiating event frequency, consequence severity, and the likelihood of failure of independent protection layers (IPLs) to approximate the risk of a scenario.
METHODOLOGY FOR VENT DISPERSION ANALYSIS STUDY
Vent is used for safe disposal of the vented gases to the atmosphere. Flammable or toxic gases are released from the vent. To ensure that the hazards of venting these gases are tolerable for the people near the site, a quantitative hazard analysis of gas venting is often required. The Dispersion study is carried to estimate and identify the quantity of material release from the vents to atmosphere, potential hazards and its effects, occurrence of hazards during the process.
METHODOLOGY FOR HAZARD IDENTIFICATION (HAZID)
HAZID (Hazard Identification) is a technique for early identification of potential hazards and threats from a project, plant, or a plant modification. It is therefore likely to be the first formal HSE-related study for any new project. The major benefit of HAZID is that early identification and assessment of the critical HSE hazards provides essential input to project development decisions. This will lead to safer and more cost-effective design options being adopted with a minimum cost of change penalty.
METHODOLOGY FOR HIRARC
The purpose of this guideline is to provide a systematic and objective approach to assessing hazards and their associated risks that will provide an objective measure of an identified hazard as well as provide a method to control the risk. It is one of the general duties as prescribed under the Occupational Safety and Health Act 1994 (Act 514) for the employer to provide a safe workplaces to their employees and other related person.
METHODOLOGY FOR FIRE PROTECTION AND SAFETY DESIGN (FPSD)
Fire protection is the study and practice of mitigating the unwanted effects of potentially destructive fires. It involves the study of the behaviour, compartmentalization, suppression and investigation of fire and its related emergencies.
Related Posts
-
FAQ-SAFETY MANUAL
08 Oct 2024 -
FAQ-HAZARD AND OPERABILITY STUDY (HAZOP)
05 Oct 2024 -
-
FAQ-SAFETY AUDIT
05 Oct 2024 -
FAQ-HAZID
14 Sep 2024